Schaerer Barista - Cup Platform; Steamjet (Steam Cup Warmer)

30
Schaerer Barista operating instructions
Operation | Cup platform
3.9 Cup platform
Raise
* Grab the opening of the cup grid with one nger
and pull it up until the hinges latch in the frame
Lowering
* Lift front of the cup grid slightly until the hinges
unlatch
* Lower the cup grid
Height adjustments when the cup grid is up
Single outlet: 82 mm
Double outlet: 77 mm
3.10 SteamJet (steam cup warmer)
Risk of burns/
Danger of scalding
• Hot steam is output through the SteamJet.
At the same time, the cups and the
adjacent surfaces get hot.
> Use heat-resistant drink containers.
> Always put a cup with the opening at the
bottom over the cup warmer before steam
is dispensed.
> Do not touch the adjacent surfaces shortly
after dispensing.
> Do not touch the outlets shortly after
dispensing.
> Never use the SteamJet function without
using a drip grid or the cup warmer insert.
Lifting cup platform
Lowering cup platform
CAUTION
Observe the Safety chapter
wfrom page 8
Clean the drip tray daily
Care
w from page 53