Schaerer Barista - Replacing Seal

64
Schaerer Barista operating instructions
Care | Replacing seal
* Wipe out the bean hoppers thoroughly with a
moist cloth.
* Let the bean hopper dry fully.
* Clean the drip trays under the bean hoppers.
* Rell the bean hoppers and reinsert them.
* Close the locking mechanism anti-clockwise.
Cleaning the drip tray below the bean hopper
Regularly clean the drip trays under the bean
hoppers
* Unlock and remove the bean hopper
* Clean the drip tray under the bean hoppers
6.5 Replacing seal
Riskofburns
• The portalters and the brewing sieves
get very hot during beverage dispensing
and cleaning.
> Do not touch the portalters and the
brewing sieves directly after dispensing or
after "Brewing group cleaning".
If necessary, the customer can change the seal
him-/herself
* Call up the seal change for the desired brewing
group in the Care menu
The animation guides you through the task
step-by-step.
* Remove the portalter
* Take the sieve out of the portalter
* Insert the portalter without the sieve
* Conrm this with
The brewing piston moves into the seal change
position.
* Wait until the next notication
CAUTION
Software
w Care
w Seal change
page 38