50
Schaerer Barista operating instructions
Software | System
Cup heating
The cup heating is switched on and off here.
Options: • Active
• Inactive
Standard
value:
Active
Touch display calibration
The touch display can be recalibrated here.
After selection, a query appears asking whether
calibration should be started.
Waterlter
Options: • Active
• Inactive
Standard
value:
Inactive
If active
A water lter is present. Service life
and water hardness can be queried.
Filter service life
The lter service life in litres is entered here.
Measured water hardness
The measured water hardness in °dKH is entered
here.
Eco Mode
If Eco mode is set to "active", the steam boiler
temperature is decreased 10 minutes after the last
beverage dispensing process.
The optional cup grid and rear wall lighting is
switched off.
If a beverage is to be dispensed when the
temperature is lowered, the coffee machine needs
up to 15 seconds to heat up.
Beverages cannot be dispensed again until after it
heats up.
Display of remaining lter
service life
w Info
page 42
To Next Page
Loading...
Need help?
General
