Schaerer Barista - Page 34

34
Schaerer Barista operating instructions
Setting the grind level | Switching off the coffee machine
Finer setting of grind level
• Making a big change to a ner grind level
can block the coffee grinder.
Important! Only adjust the grind level
when the grinder is running.
> Onlysetthegrindlevelnerbyone
scale line at a time using the knobs.
> Then dispense a coffee beverage using
the ner grinder setting.
> Repeat this step until the desired grind
level is set.
Coarser setting of grind level
A change to a coarser grind level can only be
set once.
* Push the cup storage to the back.
The arrow points to the set grind level on the grind
level knob.
* Initiate coffee dispensing and wait until the mill
starts up.
* Change the grind level as desired; to do so, push
the grind level knob downwards and turn
Grind level 1 g ne
Grind level
10 g coarse
Dispensing is not done with the new values
until the second brewing after the new
setting was made.
IMPORTANT
Observe the Warranty chapter
wfrom page 78
Grind level knob
IMPORTANT
Observe the Warranty chapter
wfrom page 78