14
2021-04-12 / V1.1
Storage
Contactors CP Series – Installation and Maintenance Instructions
6. Storage
NOTICE
Moisture and dust can damage the contactor. If
the device is to be stored for a prolonged period
of time,
►
store it in its original packaging,
►
store it in a dry and dust-free location.
Return shipments
Schaltbau recommends to keep the original packing
box for any return shipments. If no original packing box
is available care must be taken to pack the contactor in
a way that prevents damage during shipment.
7. Unpacking and handling
WARNING
The contactor is heavy. Risk of injury and
damage to the device.
X
Take care when handling the con-
tactor.
X
Always two or more persons are
required to unpack, transport and
install the contactor.
X
When carrying the contactor al-
ways hold it on the base plate.
7.1 Unpack the device
X
Before opening the packaging, perform a visual
inspection for any signs that could indicate dam-
age having occurred during transport (impacts,
bumps, falling etc.).
X
If any signs indicate that the contactor has been
subject to excessive shock inuence do not install
the contactor.
X
Unpack the contactor with the help of a second
person.
X
When carrying the contactor always hold it at the
base plate. Do not carry the contactor by holding
it at the upper part.
X
With the help of a second person, place the con-
tactor in an upright position on a stable work-
bench or table.
7.2 Check parts for transport damage
NOTICE
If parts are damaged, the functional reliability of the
contactor is no longer given.
X
Before installing, check all parts for any possible
transport damage.
X
Do not install a damaged contactor.
To Next Page
Loading...
Need help?
General
