Schindler 3300 - Page 149

Schindler 3100/3300/6300 J 43402603 / 01 149/269
Copyright © 2017 INVENTIO AG
Code Hydraulic Message
2701
to
2710
Hydraulic errors. Not used with Schindler 3100/3300/6300
If one of these errors occurs: Please contact a specialist or hotline Locarno.
Code AAT Message
3101
to
3173
AAT Automatic Acceptance Tests Errors
For further description and solutions refer to documentation Automatic
Acceptance Tests Guidelines (J 139452 or J 41140148)
3101
to
3109
SGC “Safety gear car” related errors
(see J 139452 or J 41140148)
3110
to
3114
AOS “Ascending car overspeed protection” related errors
(see J 139452 or J 41140148)
3115
to
3119
HBU “Half brake capability upward” related errors
(see J 139452 or J 41140148)
3120
to
3124
HBD “Half brake capability downward” related errors
(see J 139452 or J 41140148)
3125
to
3128
RTL “Run time limit” related errors
(see J 139452 or J 41140148)
3129
to
3133
FBU “Full brake capability upward” related errors
(see J 139452 or J 41140148)
3134
to
3138
FBD “Full brake capability downward” related errors
(see J 139452 or J 41140148)
3139
to
3144
CWB “counterweight balancing” related errors
(see J 139452 or J 41140148)
3145
to
3146
SMDO “Door opening speed” related errors
(see J 139452 or J 41140148)
3147
to
3153
SGCE “Safety gear with empty car” related errors
(see J 139452 or J 41140148)
3154
to
3157
KNU “KNE top” related errors
(see J 139452 or J 41140148)
3158
to
3161
KND “KNE bottom” related errors
(see J 139452 or J 41140148)
3162
to
3165
CIB “Car impact on buffer” related errors
(see J 139452 or J 41140148)
3166
to
3169
CWIB “counterweight impact on buffer” related errors
(see J 139452 or J 41140148)
31 70 Half brake down insufficient shaft height