Date Code 20010518 Settings 6-57
SEL-2020 Instruction Manual
WORKSHEET SET U
Date
Approved by
SEL-2020 S/N
CMD_EN* Enable SEL-2020 commands (Y/N)
CMD_CH* Command termination character
CMD_CNT Number of general-purpose commands (0-8)
CMD1 Command String 1 =
CMD2 Command String 2 =
CMD3 Command String 3 =
CMD4 Command String 4 =
CMD5* Command String 5 =
CMD6* Command String 6 =
CMD7* Command String 7 =
CMD8* Command String 8 =
STR_EN* Enable use of special-purpose commands (Y/N)
TRANS* Initiate transparent mode sequence
TRANSACK* Transparent mode acknowledge
TRANSNACK* Transparent mode denial
READ* Read data
READACK* Read data normal response
READNACK* Read data error response
WRITE* Write data
WRITEACK* Write data success response
WRITENACK* Write data error response
*Only available on Master ports
To Next Page
Loading...
