Why is the Lnk/Rx indicator off continuously for sustained periods on Schweitzer Engineering Laboratories SEL-2701?
The Lnk/Rx indicator may be off continuously for sustained periods during periods of high network traffic volume.
General| Brand | Schweitzer Engineering Laboratories |
|---|---|
| Model | SEL-2701 |
| Category | Computer Hardware |
| Language | English |
Equipment components are sensitive to electrostatic discharge (ESD).
Disconnect external connections before opening; contact with internal voltages can cause shock.
Provides an overview of the sections in this instruction manual.
Format for Internet Protocol (IP) addresses and octet entry formats.
Describes the key features and capabilities of the SEL-2701 Ethernet Processor.
Details the different configurations and physical interface options for the SEL-2701.
Illustrates various substation networking applications for the SEL-2701.
Introduces Ethernet networks and general concepts relevant to SEL-2701 operation.
Describes the Utility Communications Architecture (UCA2) and its features in the SEL-2701.
Lists the technical specifications, ratings, and type tests for the SEL-2701.
Step-by-step instructions for installing the SEL-2701 in SEL hosts.
Steps to verify the SEL-2701 is installed properly and initializes correctly.
Describes the SEL-2701 network port options and configurations.
Configuration settings for Ethernet network operation, including IP addressing.
Settings for accessing data via FTP, Telnet, and UCA2 interfaces.
Details the commands available for SEL-2701 diagnostics and configuration.
Lists features and capabilities provided by the SEL-2701 when installed in an SEL-2030.
Describes SEL-2030 settings and commands related to SEL-2701 interaction.
Details access control and user interface operations for the SEL-2701 within the SEL-2030.
Explains how to access data from the SEL-2030 using FTP, Telnet, UCA2, and GOOSE.
Lists features and capabilities provided by the SEL-2701 when installed in an SEL-400 series relay.
Describes SEL-400 relay settings and commands related to SEL-2701 interaction.
Details access control and user interface operations for the SEL-2701 within the SEL-400 series relay.
Explains how to access data from the SEL-400 series relay using FTP, Telnet, and UCA2.
Instructions for determining SEL-2701 and host firmware IDs for compatibility checks.
Explains the operation and meaning of the SEL-2701's indicator LEDs.
Methods for obtaining operational status information from the SEL-2701 and host.
Details the error codes and messages reported by the SEL-2701.
Lists common problems, their possible causes, and diagnostic/solution steps.
Lists compatible SEL-2030 firmware versions for SEL-2701 firmware.
Lists compatible SEL-421 Relay firmware versions for SEL-2701 firmware.
Defines column headings for GOMSFE model tables and rules for data retrieval.
Lists the domains present in an SEL-2030 and how the SEL-2701 uses them.
Details models within the Logical Device 0 (LN0) domain for SEL-2030 data.
Describes virtual device domains for SEL relays connected to SEL-2030.
Details models for non-SEL devices and communication cards in SEL-2030.
Lists rules that apply to GOMSFE models for data translation.
Configures SEL-2030 and SEL-2701 for data collection and control with an SEL-351S Relay.
Illustrates GOMSFE models visible in an MMS browser after configuration.
To Next Page
