Schweitzer Engineering Laboratories SEL-2701 - Section 1: Introduction

xii
SEL-2701 Ethernet Processor Instruction Manual Date Code 20020501
Preface
Manual Overview
You probably will not need to review the entire manual to perform the specific
tasks that are your responsibility. The following is an overview of the sections
in this instruction manual:
Preface . Describes how this manual is organized and conventions used in
this manual.
Section 1: Introduction . Provides an overview of Ethernet networking and
a description of the SEL-2701.
Section 2: Installation . Describes how to install the SEL-2701 in various
SEL hosts.
Section 3: Settings and Commands . Describes SEL-2701 operation and
configuration.
Section 4: SEL-2030 Host . Provides detailed information on how to use the
SEL-2701 within the SEL-2030.
Section 5: SEL-400 Series Host . Provides detailed information on how to
use the SEL-2701 within the SEL-400 series relays.
Section 6: Troubleshooting . Describes techniques for testing and
troubleshooting SEL-2701 installations.
Appendix A: Firmware Versions . Lists the firmware versions applicable to
this manual.
Appendix B: UCA2 GOMSFE Models . Lists rules for how the SEL-2701
populates the UCA2 GOMSFE application layer maps.
Appendix C: GOMSFE Model Example . Illustrates how the SEL-2701
populates the GOMSFE models for an SEL-351S Relay connected to
an SEL-2030.