Date Code 20020501 SEL-2701 Ethernet Processor Instruction Manual
Section 4
SEL-2030 Host
Introduction
This section describes applications where the SEL-2701 is installed in an
SEL-2030 host. For detailed explanations of SEL-2701 commands and
settings, refer to Section 3: Settings and Commands. This section contains
information on the following topics:
➤ Using the SEL-2030 to access SEL-2701 settings
➤ Setting the SEL-2030 to control SEL-2701 operation
➤ Accessing data in an SEL-2030 through the SEL-2701
➤ Accessing the SEL-2701 User Interface
See Section 2: Installation for instructions on how to install an SEL-2701 in a
host. See the SEL-2030 Reference Manual and SEL-2030 User’s Guide for
additional information about the SEL-2030. The SEL-2030 User’s Guide also
contains information about upgrading SEL-2701 and SEL-2030 firmware.
To Next Page
Loading...
