Date Code 20020501 SEL-2701 Ethernet Processor Instruction Manual
Section 5
SEL-400 Series Host
Introduction
This section describes applications where the SEL-2701 is installed in an
SEL-400 series relay. This section contains information on the following
topics:
➤ Using the SEL-400 series relay to access SEL-2701 settings
➤ Accessing data in an SEL-400 series relay through the
SEL-2701
➤ Checking SEL-400 series relay status from the SEL-2030
➤ Accessing the SEL-2701 user interface
For detailed explanations of SEL-2701 commands and settings, refer to
Section 3: Settings and Commands. See Section 2: Installation for instructions
on how to install an SEL-2701 in a host. See the instruction manual for your
relay for additional information about relay commands, settings, and
operations. The relay instruction manual also contains information about
upgrading SEL-2701 and relay firmware.
To Next Page
