Date Code 20010518 Appendix B B-5
SEL-2020 Instruction Manual
Table B.1 AT Command Set Description – Radicom Part # 336MM-T-SEL (continued)
Ampersand
Commands
Function
&P0 Pulse dial make/break ratio of 39/61 @ 10 PPS*
&P1 Pulse dial make/break ratio of 33/67 @ 10 PPS
&P2 Pulse dial make/break ratio of 39/61 @ 20 PPS
&P 3 Pulse dial make/break ratio of 33/67 @ 20 PPS
&S0 DSR always active*
&S1 DSR in accordance with V.25
&T0 Terminate test in progress*
&T1 Begin local analog loop-back test
&T3 Begin local digital loop-back test
&T4 Accept a request from a remote modem for remote digital loop-back test
&T5 Reject a request from a remote modem for remote digital loop-back test
&T6 Begin a remote digital loop-back test
&T7 Begin a remote digital loop-back test with self-test
&T8 Begin a remote analog loop-back test with self-test
&V View modem settings
&W0 Store active profile as user profile 0*
&W1 Store active profile as user profile 1
&Zn=x Store telephone number x in memory location n
Other
Commands
Function
%E0 Disable line quality monitor/auto retrain
%E1 Enable line quality monitor/auto retrain
%E2 Enable line quality and fallback/fall forward*
%L Read received line signal level
%Q Read line signal quality
\A0 Set maximum MNP block size to 64 characters
\A1 Set maximum MNP block size to 128 characters
\A2 Set maximum MNP block size to 192 characters
\A3 Set maximum MNP block size to 256 characters*
* Modem factory default settings
To Next Page
Loading...
