B-12 Appendix B Date Code 20010518
SEL-2020 Instruction Manual
Table B.3: AT Command Set Description - Part # XE1414A (continued)
Ampersand
Commands
Function
&K0 Disable flow control
&K3 RTS/CTS flow control
&K4 XON/OFF flow control
&K5 Transparent XON/XOFF flow control
&K6 RTS/CTS and XON/XOFF flow control
&P0 Pulse dial make/break ratio of 39/61 @ 10 PPS*
&P1 Pulse dial make/break ratio of 33/67 @ 10 PPS
&P2 Pulse dial make/break ratio of 39/61 @ 20 PPS
&P 3 Pulse dial make/break ratio of 33/67 @ 20 PPS
&S0 DSR always active*
&S1 DSR in accordance with V.25
&T0 Terminate test in progress*
&T1 Begin local analog loop-back test
&T3 Begin local digital loop-back test
&T4 Accept a request from a remote modem for remote digital loop-back test
&T5 Reject a request from a remote modem for remote digital loop-back test
&T6 Begin a remote digital loop-back test
&T7 Begin a remote digital loop-back test with self-test
&T8 Begin a remote analog loop-back test with self-test
&V0 View active profile and user profile 0*
&V1 View active profile and user profile 1
&W0 Store active profile as user profile 0*
&W1 Store active profile as user profile 1
&Zn=x Store telephone number x in memory location n
* Modem factory default settings
To Next Page
Loading...
