BGX501-742-R01, APEX 100 User Manual
4.3 Display Groups
The display is arranged into groups for easier navigation.
1. Favourites
2. User Configuration
3. Power Quality
Favourites
These are selected from all the available pages and are your personal selection of commonly visited pages.
The list is field configurable up to a maximum of 10 parameters.
User Configuration
A maximum of seven user configuration pages can be displayed.
Power Quality
Power quality parameters are fixed screens, see example below.
Figure 24: Power Quality Example
4.4 Scroll Lock
In “Auto Display” mode the screen is designed to automatically scroll. The scrolling action can be interrupted by
pressing and holding the UP button till the scrolling stops. If no further button is selected, the scroll lock will
timeout and resume from where it was interrupted. Scrolling can also be enabled by pressing and holding the
Up button. After a power interruption, if the scrolling feature was enabled, the display will continue from its
previous position.
4.5 Display Buttons
The meter has four user buttons. One button is for MD reset and is behind a sealable door. The other three are
used for navigating through the display and configuration menu options.
To Next Page
Loading...
