SED 024.16.720 - Page 58

www.sed-owcontrol.com
58
Accessories
Type 024.16.720
17. ACCESSORIES
Designation Order no.
RS232 adapter for connection to a PC in conjunction with an extension
cable
00311.2416.003
Communications software based on FDT/DTM technology
(Information see chapter entitled “17.1. Communications software (PC
SOFTWARE based on FDT/DTM technology):”)
Information at
www.sed-owcontrol.com
Connection cable M12 x 1, 8-pole 00311.2416.002.8
Table 32: Accessories
17.1. Communicationssoftware(PCSOFTWAREbasedonFDT/DTM
technology):
ThecommunicationssoftwareconsistsoftheSEDFlowControlDTMdevices(congurationandparameter-
ization software) and an associated frame application, e.g. PACTware 3.6.
The DTMs can only run in conjunction with an FDT frame application such as PACTware.
The PC operating program is designed for communication with the devices from the SED Flow Control
positioner family (basic models without display).
A detailed description and precise schedule of the procedure for the installation and operation of the
software can be found in the associated documentation.
17.1.1. PACTware 3.6
Frame program of the PACTware Consortium e. V. for the recording and operation of FDT 1.2 or FDT 1.2.1
compliant DTMs of any manufacturers.
Microsoft .NET Framework 1.1 + .NET Framework 1.1 SP1 must be installed.
17.1.2. Serial interface RS 232
The PC requires an RS 232 serial interface for communication with the positioners as well as an additional
adapter with interface driver (see “Table 32: Accessories”).
TheRS232datatransfermustbeaccordingtoHARTspecication;theHARTcommunicationsDTM,also
installed during the installation of PACTware, can be used for this.
17.1.3. Download
Download the software (DTM and PACTware) at: www.sed-owcontrol.com
The latest version of the communications software is always available by means of the download function.