EasyManua.ls Logo

Sega TARGET BRAVO OPERATION GHOST - FUSES AND FUSE REPLACEMENT

Sega TARGET BRAVO OPERATION GHOST
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRECAUTIONS REGARDING INSTALLATION LOCATION
7
2
To install this product, the entrance must be at least 1.8m (70.8in) in width
and 2.37m (93.3in) in height (without Assy Billboard) and 2.75m (108.2in)
in height (with Assy Billboard). If the entrance is too narrow, do not tilt the
product carelessly. If all the product weight is put on the casters at one side
only, there could be damage or deformation, causing serious accidents such
as workers getting caught underneath.
Do not attempt to push/pull whilst holding onto the Assy Billboard. This may
result in part damage and/or personal injury.
2.07m (81.49 in)
0.25m (9.8 in)
0.6m (23.6 in)
0.25m (9.8 in)
OPERATION AREA (55inch Cabinet)
2.28m (89.7inches)
1.93m (75.9inches)

Table of Contents

Related product manuals