Body
28
One S1
Body Disassembly
Tools Required
• 3 mm hex wrench
• Phillips screwdriver
Setup
Make sure the One S1 is powered off and the
charger is not connected.
1. Remove the following components:
a. Both battery covers (page14)
b. Both batteries (page15)
c. Both Pedals (page18)
d. Both LED covers (page22)
2. Press and hold the ON/OFF button until all
lights are off in order to discharge any power
remaining in the One S1.
WARNING!
Failure to discharge residual power could result
in injury or death due to electric shock.
Figure 18: Body
To Next Page
Loading...
