SP395 SoundPro Audio Integrator Form7492 Operation Manual
3
• Impedance Sweep: Plots the impedance of a load by sweeping the generator through its
frequency range and graphing the impedance at each 1/12 octave step.
• Cable Tester: Provides a cable attenuation test at 1 kHz and 20 kHz, and a polarity test to
identify defective or improperly wired cables.
• USB Preamp Control: Serves as a calibrated USB microphone preamp. Use as a sound
card for a PC based analysis program or to route audio from a PC to the Audio Integrator
main outputs.
• Audio Scope: Provides a voltage vs. time graph of the audio waveform to look for
distortion or clipping.
To Next Page
Loading...
