34 Modulation
Sequential
Modulation
Although the overall sonic character of the Take 5 is determined by its
oscillators and lters, much of its power to make unique sounds comes
from creative use of modulation. Modulation is the process of routing
one parameter (used as a control voltage) to another parameter in order to
change the way the targeted parameter behaves.
The Modulation assignment controls
The idea is simple:
1. Choose a source.
2. Choose a destination.
3. Set an amount. The amount can usually be either positive or negative.
120 MOD 1
ModWheel
45
Overdrive
1/16
M
BBDUp+Down
M
Indicates whether
a mod source/destination
is mono (M) or poly (P)
Indicates mod slot number
amount
source
destination
Use this knob to
scroll through
mod slots and
source/amount/destination
Use this knob to
set the mod source
mod amount
mod destination
select
value
To Next Page
Loading...
