77
Take 5 User’s Guide
Appendix D: Calibrating the Take 5
4. On the Take 5 that you want to send the programs from, in the global
menu select dump preset, dump bank, or dump all banks, depending on
which of these you would like to do.
5. Press write. The program or bank is exported to the other Take 5.
Dumped programs will load back into the same bank and program location in
memory when received by the Take 5 via MIDI.
Importing Programs and Banks
You can use a MIDI librarian application such as such as SysEx Librar-
ian for Macintosh, or MIDI-OX for Windows to transmit exported
program or banks back into your Take 5. You will need a computer and
an appropriate software application.
To import a program or bank as a SysEx le over MIDI:
1. Connect your synthesizer to a computer using a USB cable (or MIDI
cable, if you are using a dedicated MIDI interface).
2. Press the global button on the Take 5.
3. Use the select knob to select midi sysex cable, then use the value
knob to choose usb or midi, depending on which port you are using to
connect to your computer.
4. Open your MIDI librarian software and congure it to send SysEx
messages to your Take 5.
5. In the MIDI librarian, open the programs and/or banks you want to send.
6. Transmit the programs. The Take 5 should load them. They will replace
any existing programs in those same memory locations on the synth.
Programs will load back into the same bank and program locations from which
they were originally exported.
To Next Page
Loading...
