Sequential TAKE 5 - Effects

40 Effects Sequential
Effects
You can add up to two digital effects per program. The rst effect can be one of
several classic device emulations, including various delays, chorus, ang-
ing, ring modulation, and others. The second effect is a dedicated reverb
with variable decay, pre-delay, damping, and tone. Effects are saved with
programs.
Effect Types
• Delay - classic stereo digital delay
• BBD - vintage bucket-brigade delay emulation
• Tape Delay 1 - vintage tape delay emulation
• Tape Delay 2 - vintage tape delay emulation with greater tape saturation
• Chorus - vintage stereo chorus
• Flanger - vintage through-zero anger
• Phaser - vintage 6-stage phaser
• HP Filter - high-pass lter
• Distortion - classic op amp distortion
• Ring Mod - ring modulation
• Rotating Speaker - vintage rotating speaker emulation
• Dedicated Reverb (Effect 2) - plate reverb with variable time, tone, and
early reections.
EFFECT TIME KNOB DEPTH/MIX KNOB FBACK/MISC KNOB
Stereo Delay Time Mix Feedback
BBD Time Mix Feedback
Tape Delay 1 Time Mix Feedback
Tape Delay 2 Time Mix Feedback
Chorus Rate Depth LPF Cutoff
Flanger Rate Depth Feedback
Phaser Rate Depth Feedback
High-pass Filter Frequency Mix Resonance
Distortion Gain Output Level Tone
Ring Modulation Pitch/Carrier Freq Mix Pitch Track On/Off
Rotating Speaker Speed Drive Mic Distance