55
Take 5 User’s Guide
Pitch and Mod Wheels
Modulation Wheel
The Mod wheel controls the amount of modulation for any program that
uses it as a modulation source. This allows you to “perform” modulation in
real time by moving the wheel. This is a great way to add expressiveness
to a sound or performance by using it to control vibrato, lter effects, and
potentially a lot more.
To choose a modulation destination for the Mod wheel:
1. In the modulation section, press the src assign button. Use the select
knob to scroll to Mod Slot 1 if it’s not already displayed.
2. Use the value knob to scroll through the various mod sources and
choose mod wheel.
3. Use the value knob to to scroll through the various mod destinations
and choose a parameter (such as cutoff).
4. Hold down a note on the keyboard (or press the hold button and play a
note on the keyboard) and turn the Mod wheel.
5. Use the value knob to set the modulation amount to your preference.
Higher amount settings add greater modulation the further you push
the Mod wheel. A negative amount setting will apply modulation in the
negative direction.
As a shortcut, you can hold down the src assign button and move the Mod
wheel to quickly assign this modulation path.
To Next Page
Loading...
