Sequential TAKE 5 - Page 62

53
Take 5 User’s Guide
Glide
To select a Glide Mode:
1. Press the program button.
2. Use the  knob to locate the   parameter.
3. Use the  knob to choose a glide mode.
4. Play a series of notes up and down the keyboard to hear the effect.
5. Once you’ve chosen the desired mode, press the write button twice to
save the program.
To set the Glide Amount separately for each oscillator:
1. Press the program button.
2. Use the  knob to locate the    parameter.
3. Use the  knob to set the amount as you play a series of notes up
and down the keyboard to hear the effect.
4. Once you’ve chosen the desired amount of glide for oscillator 1, use
the  knob to locate the    parameter.
5. Use the  knob to set the desired amount of glide for oscillator 2 as
you play a series of notes up and down the keyboard to hear the effect.
6. When you’re nished, press the write button twice to save the
program.