Cutline: Dash Cam> Click to open the settings
The central control touch screen can set the parameters
of the dash cam. In the real-time preview interface, touch
the setting icon to enter the setting interface.
1 1080P、 720P
2
1 minute, 3 minutes, 5 minutes
3 Off, low, normal, high
4 year/month/day, month/day/year,
day/month/year
5 execute
6 execute
●
Before using dash cam, please clean the windshield
to ensure the recording quality.
●
In severe weather (such as rain, snow, fog, smoke,
sand, haze, frost, etc.) when the visibility is low, the
image quality of the driving recorder may deteriorate.
●
When the vehicle is driving, please do not operate
the dash cam or watch the video, so as not to affect
the driving safety.
●
Do not use the dash cam for a long time when the
vehicle is not started, so as not to cause the battery to
lose power and affect the normal start of the vehicle.
●
Do not insert or remove the memory card while
power is on, otherwise the last few seconds of video
will be lost, and the memory card may even be
damaged.
●
When there is too much data in the memory card
and the available capacity is small, the card writing
rate may decrease. It is recommended to format the
data through the central control touch screen after
backing up the data.
●
It is recommended that the memory card be
dedicated to the dash cam. If there are too many user
data (not used by the dash cam) in the memory card
and the remaining memory is less than 2GB, the dash
cam may not recognize the card.
To Next Page
Loading...