Blind Spot Detection (BSD) / Lane Change
Assistance (LCA) are adapted when driving vehicle.
They monitor the blind area behind the vehicle and
the vehicles on the adjacent lanes to remind driver to
prevent danger.
Cutline: Verify vehicle icon
● When detecting a vehicle is approaching behind
the vehicle, the indicator light on the rearview
mirror will be lit.
● If driver continues to turn on the turn signal to
change lanes, then warning light on the
corresponding side rearview mirror will be on,
and buzzer will give an audible alarm to remind
the driver of the danger of collision.
Cutline: Configuration > ADAS assistance
(Configuration functions differ in vehicles, please refer to
the actual vehicle)
LCA is an information system, not a warning or
safety system, and does not work properly under
all conditions.
• Although the vehicle is equipped with LCA
system, you should still look around and make
sure the surrounding environment is safe for
lane change.
• When reversing, LCA will not work.
•
It is driver’s responsibility to ensure the safety
of changing lanes.
1 BSD / LCA Click the button, icon lights up to
indicate it is on, turns gray off.
The system does not exempt the personal
responsibility for correctly judging the state
of vision and traffic.
To Next Page
Loading...