Acoustic vehicle alerting system
Since the noise of electric vehicles is relatively small
when it is at low speeds, the surrounding pedestrians are
difficult to detect it. In order to improve driving safety,
the system can emit a warning sound when the vehicle
speed is less than 30 km/h, which can alert pedestrians.
• In situations where pedestrians may
appear, VSP must not be turned off.
• If the vehicle is driving with the VSP
turned off, surrounding pedestrians may
fail to notice the moving vehicle and
casualties might be caused.
• If VSP is activated but the vehicle does
not emit a warning sound at low speed,
please contact Service Center immediately.
The OFF switch of the VSP system can only
be used when there are no other road users
within a short distance and surrounding
environment obviously does not need a
sound. After it is closed, it will be turned on
by default the next time when vehicle is
started.
Cutline: Configuration > Sound assistance (Configuration
functions differ in vehicles, please refer to the actual
vehicle)
/
● Vehicle Sound for Pedestrians (VSP Click the
button, the icon lights up to indicate that the
function is turned on, turns gray means off.
Set VSP on touch screen. After it is turned on, 3 sounds
can be set, and the default is sound 1.
1
2
3
4
5
6
7
8
9
10
11
智能驾驶辅助 105
To Next Page
Loading...
Need help?
General