The user can remotely operate the vehicle through
the mobile phone APP (SERES). Under the
conditions of remote control, user only need to click
on the relevant interface. The specific functions are
as follows:
● Remotely unlock.
● Remote raise/lower car windows.
● Remote control sunrrof.
● Remotely control the back door.
● Find a car remotely.
● Remotely turn on and off seat heating.
● Remote control of the air conditioner: including
turning on/off and temperature adjustment (after
turning on the air conditioner remotely, the
power state is in the ON position and in the
remote mode. If brake is applied, remote mode
will be switched to the local mode, and the
power state will be switched from the ON to
OFF. Air conditioner will be turned off).
● Remote scheduled charging: It is divided into
remote scheduled charging and remote
immediate charging. The immediate charging
button can only be popped up when the charging
gun is inserted and not charging. Related settings
can also be made during the charging process,
including setting the maximum current.
● Remote diagnosis: Refresh, check vehicle-related
fault information through APP
● Remote control of the headlights: The high and
low beams of the vehicle can be controlled
through the APP.
The vehicle mobile APP allows you to use your
iPhone® or Android™ mobile phone to
communicate with the vehicle remotely. With this
APP, you can check the charging progress, start and
stop charging, heat or cool the vehicle, locate the
vehicle or track its movement, flashing lights,
honking, locking and unlocking, and other
functions.
Firstly, download the mobile APP (SERES) to your
mobile phone and insert your login credentials. Then
open its remote settings through the vehicle to ensure
that the vehicle is ready so that you can communicate
with the mobile application.
To Next Page
Loading...