If you find an increase in brake pedal travel or
significant loss of brake fluid, please contact the
SERES after sales service center immediately.
Under these conditions, driving may lead to
extended braking distance or complete failure of
braking.
Do not top up the brake fluid. SERES after sales
service center will provide this service during regular
maintenance of the vehicle. The following operating
instructions provide information for reference only:
1.
Before removal, clean the tank cover to prevent
dust from entering the reservoir.
2. Unscrew and remove the cap.
3. Fill the reservoir with brake fluid conforming to
HZY4 technical specifications until the brake
fluid level reaches the MAX mark.
4. Cover the tank.
If the amount of fluid in the brake fluid storage tank
is lower than the recommended level, the brake light”
”on the instrument will give an alarm. If an alarm is
given during driving, brake immediately under the
condition of ensuring safety, pull over and do not
continue driving. Please contact the SERES
after-sales service center immediately for assistance.
To Next Page
Loading...