SERES SF5 - General Diagnostic Interface; VIN Code Reading and Writing

General diagnostic interface
Figure: OBD socket at the bottom left of the instrument
Vin code read / write
VIN codes can be read/written from the VCU
and ECU by connecting the OBD header in a
diagnostic device (e.g. TDS860 Langren
Technology) to the OBD diagnostic port
located at the bottom of the driver's dashboard.
illustration
Diagnostic instrument equipment can be
purchased through SERES after sales service
center.
1
2
3
4
5
6
7
8
9
10
11