The height, brightness, and interface of the head-up
display can be set using the button on the left side of
the steering wheel to operate the setting menu in the
dashboard.
Cutline: setting of Head up display
1 enter into the
configuration interface
Cutline: Option adjustment
Select the options that need to be set
1 Select to enter into the height adjustment of
projection screen.
2 Select to enter into the brightness
adjustment of the projection screen.
3 Select to enter the projection screen
display adjustment
Cutline: Cleaning head-up display area
Please use a clean and dry microfiber cloth to
gently wipe the head-up display projector area.
If necessary, slightly soak the microfiber cloth.
• Do not place any liquid containers near the
head-up display projector. If liquid enters the
projector area, it may cause electrical failure.
• Do not place any objects or stickers on the
head-up display projector or windshield
projection area, otherwise the head-up display
indication may be interrupted.
• Do not touch the inside of the head-up display
projector or throw sharp-edged objects or similar
objects into the projector, otherwise it may cause
mechanical failure.
To Next Page
Loading...