The vehicle is equipped with some electronic modules to
monitor and record the data of each on-board system
(including motor, main battery pack, braking and
electrical system). these electronic modules record
various driving conditions and driving conditions,
including braking, acceleration, travel information and
other driving information. At the same time, they also
record vehicle function information, such as charging
event and status, enabling / disabling of each system,
diagnostic fault code, vehicle identification (VIN),
vehicle speed, driving direction and place.
These data are stored by the vehicle. During vehicle
maintenance, they can be accessed, used and stored by
professional authorized maintenance technicians, or regularly
wirelessly transmitted to Chongqing Jinkang(SERES)New
Energy Vehicle Co., Ltd. through the on-board remote
information system. Chongqing Jinkang (SERES)new energy
after sales service center can use the data to perform the
following operations, including providing remote information
service; carries out troubleshooting and vehicle quality, function
and performance evaluation; to help Chongqing Jinkang
(SERES)new energy after sales service center and its partners
carry out analysis and research to complete the improvement
and design of vehicles and vehicle systems; and for other
purposes specified by law. Only audit is required during vehicle
maintenanceVehicle data recording can solve the problem
remotely.
The on-board telematics system regularly
wirelessly transmits driving information to
Chongqing Jinkang (SERES)New Energy
Vehicle Co., Ltd. the use of these data, as
described above, helps to ensure proper
maintenance of the vehicle. Additional
functions of the vehicle may require the use of
the on-board telematics system and the of
vehicle syste
informationprovided, including some functions,
such as charging prompt and software upgrade,
remote access and control.
Chongqing Jinkang(SERES)New Energy
Vehicle Co., Ltd. will not disclose any recorded
information (except vehicle maintenance
related data) to the vehicle owner.
At the time of delivery, some mileage will be displayed
on the vehicle odometer. This is the result of a
comprehensive test to ensure the quality of the vehicle.
The test process includes tests during and after
production. The final inspection is completed by the
vehicle, including road tests by technicians.
Vehicles may vary slightly, depending on vehicle options,
software version, purchase area and specific vehicle
settings. All descriptions and instructions are detailed at
the time of release. However, since continuous
improvement is our goal, we reserve the right to modify at
any time.
To Next Page
Loading...