SERES SF5 - Anti-Pinch Function and Initialization

When the window is automatically closed, the anti pinch
function will be enabled. During the window closing process,
if the window touches an obstacle, it will stop closing and
open immediately.
Warning
• Passengers are not allowed to extend any
part of their body out of the window,
otherwise flying debris, branches or other
obstacles may cause serious injury.
• Before closing the window, the driver must
ensure that all passengers (especially children)
do not lean out of the window, otherwise
serious injury may be caused.
• Do not extend anything out of the
window, otherwise the anti pinch
mechanism may be damaged when closing
the window.
1. Operate the window switch to rise to fully close the
window. Operate the window to rise again to lock
the window glass upward at the top position for 2S .
2. First lower the window glass to the bottom
position, and then raise the window glass to the
top position.
The manual learning process is completely completed. If
it has the automatic rising function, it indicates that the
window learning is successful.
In this learning mode, the process of raising and lowering
windows needs to be completed continuously. If the
window glass stops, it needs to learn again.
Close the door and long press the locking key of the
remote key “ ” ， The four windows will automatically
lower to the bottom and then rise to the top to complete the
learning.
1
2
3
4
5
6
7
8
9
10
11