EasyManua.ls Logo

SERES SF5 - Page 32

SERES SF5
204 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Picture: Waist support adjustment button
After inflating and deflating the air bag in the seat, adjust
the seat waist support to a suitable position, and then
release the waist support adjustment button.
Warning
Before adjusting the front seats, make
sure that there are no obstacles in the area
around the seats.
During driving, do not adjust the seat,
otherwise it will increase the risk of accident.
Excessive tilting of the seat back during
driving may cause serious injury in the
event of a collision, because the body is
very easy to slip under the seat belt or be
tightly restrained by the seat belt at this
time. Make sure that the seat back cannot be
tilted more than 30 degrees when the
vehicle is driving.
Picture: Seat adjustment status
Front seat cushion depth 495mm
8
Compared with the design position, the design
position of the main driver can be adjusted forward
by 220mm, the design position of the assistant driver
can be adjusted forward by 180mm (A1), and the
design position of the front row can be adjusted
backward by 20mm (A2).
Compared to the design position, the seat back angle
can be adjusted forward by 25° (β1) or backward by
49° (β2).
Compared to the design position, the seat height can
be adjusted up to 40mm (B1) or down to 20mm (B2).
Introduction
At the same time, you can only control one
electric seat adjustment button to adjust
the seat.

Table of Contents