Picture: ISOFIX fixture
The ISOFIX fixtures are located in the two seats on
the outside of the rear row. The location of the
fixtures is marked with ISOFIX.
When installing a child safety seat or baby seat, please
refer to the manufacturer's instructions. Please put the
child safety seat installation instructions into the glove
box for easy reference at any time.
1. Unzip the ISOFIX fixture zipper.
2. Install the child safety seat in the ISOFIX fixture
according to the child safety seat installation
instructions.
3. Fasten the top strap behind the rear seat.
4. Pull out and rock the child safety seat from side
to side to make sure it is secured in place.
Picture: Top strap fixing device
Fasten the hook to the anchor support and fasten the
top strap to make sure that the top strap is fastened.
● Read carefully and follow the detailed
instructions provided by the child safety seat
manufacturer.
Before a child rides, always make sure that the child safety
seat is not loose:
● Fix the child safety seat according to the seat
belt path and try to slide the safety seat from side
to side, front to back.
● If the seat moves more than 2.5cm, please fasten
the seat belt or reconnect the ISOFIX fixed child
safety seat.
● If you can't fasten it tightly, try the other side
of the seat or change to a child safety seat.
To Next Page
Loading...