EasyManua.ls Logo

SERES SF5 - Dashboard Indicator Lights

SERES SF5
204 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ExampleAlarm indicator (Picture indications or icons are for illustrative purposes only. Depending on vehicle options, software version, market area, OTA upgrades,
etc., the displayed information may be slightly different. For specific information, please refer to the actual vehicle)
Energy recovery: Energy recovery is in progress.
READY light: The vehicle is ready to drive.
Power limitation: vehicle power limitation.
Charging connection: the charger is connected.
Charging indicator: The vehicle is charging.
Low battery alarm: Please connect the charger.
Drive motor failure indicator: Please contact SERES service center
immediately
Power battery failure indicator: Please contact SERES service
center immediately
Power system failure indicator: Please follow the instructions in the
displayed information and contact SERES service center immediately
Insulation system failure indicator: Please contact SERES service
center immediately.
Coolant indicator flashes: Collant liquid level is low.
Coolant lamp is always on: warning of high coolant temperature.
Oil pressure indicator: It warns that the oil pressure is too low,
please contact SERES service center immediately.
Range extender failure indicator: Please contact SERES service
center immediately.
Low fuel warning light: Please refuel immediately.
Low-voltage battery charging indicator: Please follow the
relevant instructions displayed.
DC / DC fault warning light: Please follow the instructions of the
displayed information and contact SERES service center
immediately.
The indicator light is always on: Please follow the instructions of
the relevant information displayed and contact the SERES service center
immediately.
The indicator light flashes: the neutral signal is lost warning light,
please follow the instructions of the displayed relevant information
and immediately contact the SERES Service Center.
The indicator light flashes: The vehicle electronic stability
program (ESC) function activates the indicator light.
The indicator light is always on: the vehicle electronic stability
program (ESC) failure indicator light, please follow the
instructions of the relevant information displayed and contact the
SERES service center immediately.
When the vehicle electronic stability program (ESC) is closed,
the indicator light is on.
Indicator light for slow descent.

Table of Contents