SEW-Eurodrive MFE Series - Page 123

15
Technical data
Technical data for field distributors
Manual – EtherCAT
®
Interfaces, Field Distributors
123
15.4.2 MF../Z.6. field distributors
MF../Z.6.
Connection voltages V
line
AC 3 x 380V -10% – AC 500V +10%
AC 3 x 200V -10% – AC 240V +10%
Line frequency f
line
50–60Hz
Max. permitted total cur-
rent X1
(X1 terminal)
I
max
32A (according to UL max. 30A)
Max. permitted total cur-
rent X21
(X21 terminals)
32A
Max. permitted total cur-
rent X20
(X20 terminals)
12A
Maintenance switch Load disconnector and line protection
Type: ABB MS 325 – 9 + HK20
Switching: black/red, triple lock
Ambient temperature -25°C–55°C
Storage temperature -25°C–85°C
Degree of protection IP65 (fieldbus interface, power supply connection cover and motor con-
nection cable attached and fastened, all plug connections sealed)
Interface PROFIBUS, PROFINET IO, EtherNet/IP™, EtherCAT
®
, DeviceNet™
Permitted motor cable
length
max. 30m (with SEW‑EURODRIVE hybrid cable, type B)
Mass Approx. 3.6kg
25809148/EN – 01/2019