SEW-Eurodrive MFE Series - Page 126

15
Technical data
Technical data for field distributors
Manual – EtherCAT
®
Interfaces, Field Distributors
126
15.4.5 MF../MM../Z.8. field distributors with operating point 230V/60Hz
MF../MM..-233-00/Z.8.
MOVIMOT
®
inverter MM
03D
MM
05D
MM
07D
MM
11D
MM
15D
MM
22D
Size 1 2
Connection voltages V
line
AC 3 x 200V -10% – AC 240V +10%
Line frequency f
line
50–60Hz
Max. permitted total cur-
rent X1
(X1 terminal)
I
max
32A (according to UL max. 30A)
Motor power S1 P
Mot
0.37kW
0.5HP
0.55kW
0.75HP
0.75kW
1.0HP
1.1kW
1.5HP
1.5kW
2.0HP
2.2kW
3.0HP
Nominal line current I
line
AC 1.9A AC 2.4A AC 3.5A AC 5.0A AC 6.7A AC 7.3A
Nominal output current I
N
AC 2.5A AC 3.2A AC 4.0A AC 5.5A AC 7.3A AC 8.7A
Output voltage V
O
0 – V
line
Max. permitted total cur-
rent X21
(X21 terminals)
32A
Max. permitted total cur-
rent X20
(X20 terminals)
12A
Maintenance switch Load disconnector
Type: ABB OT16ET3HS3ST1
Switching: black/red, triple lock
Ambient temperature -25°C–40˚C (P
N
reduction: 3% I
N
per K to max. 55°C)
Storage temperature -25°C–85°C
Degree of protection IP65 (fieldbus interface, power supply connection cover, MOVIMOT
®
in-
verter and motor connection cable attached and fastened, all plug con-
nections sealed)
Interface PROFIBUS, PROFINET IO, EtherNet/IP™, EtherCAT
®
, DeviceNet™
Permitted motor cable
length
15m (with SEW‑EURODRIVE hybrid cable, type A)
Mass Approx. 5.2kg Approx. 6.7kg
25809148/EN – 01/2019