EN – 10
Automatic Cooking
For your ease and convenience there are 12 automatic cooking programmes for use with the Air Frying function of
your air fryer. These are easily accessed via the dedicated AUTO MENU button on the control panel.
This operation can be skipped.
Press AUTO
MENU button
until the desired
programme
appears.
Press TEMP/
TIME to enter
the temperature
adjustment.
Press -/+ to
adjust the
temperature.
Press TEMP/
TIME to enter the
time adjustment.
Press -/+ to
adjust the
cooking time.
Press START/
CANCEL to start
the cooking.
1. Plug the air fryer into the mains supply.
2. Ensure that the frying tray is correctly inserted into the inner pot.
3. Place the food to be cooked evenly onto the frying tray and slide the inner pot into the air fryer.
4. Select the desired food by pressing the AUTO MENU button on the control panel to select the food to cook. The
default temperature and time will blink in the LED display.
a. If needed, press the "TEMP/TIME" button once, and then press "-" or "+" button to set the desired cooking
temperature.
b. If needed, press the "TEMP/TIME" button once, and then press "-" or "+" button to set the desired cooking
time.
5. Press "START/CANCEL" button to start the cooking; the time counts down.
6. When the cooking is complete the air fryer will make a sound, and the unit returns to standby mode.
7. Pull out the inner pot with care and remove the food immediately or the heat remaining in the air fryer will
continue to cook and dry out your food.
Note: If you are changing the cooking time for the auto cook foods it is only possible to increase the maximum by
30%. This is to avoid the potential of burning your food.
To Next Page
Loading...
