115
TROUBLESHOOTING
7
Section C
Remove the misfed original from the exit area.
If the misfed original cannot be easily removed
from the exit area, open the feeding roller cover,
open the document feeder tray, and remove the
original.
2
Open and close the RSPF to make the
misfeed location indicator stop
blinking.
You can also make the
misfeed indicator stop
blinking by opening and
closing the feeding roller
cover.
3
Return the originals indicated by the
minus number in the display to the
document feeder tray and press the
[START] key ( ).
Copying will resume from the originals that still
remained when the misfeed occurred.
MISFEED IN THE BYPASS TRAY
1
Gently pull the misfed paper out.
2
Open and close the side cover.
The misfeed indicator
( ) will go out.
• When closing the side cover, press down on
the handle.
• If the misfeed indicator ( ) does not stop
blinking, check for torn pieces of paper in
the machine.
• When closing the side cover, remove the
paper on the bypass tray first. If not, the
front paper will be smudged that cause the
lose of image or misfeed.
To Next Page
Loading...
Need help?
General
