43
BEFORE USING THE MACHINE
2
1
Perform steps 1 to 5 of "CHANGING A
TRAY'S PAPER SIZE SETTING" (p.41),
and select the tray whose paper type
you want to change.
2
Press the [Copy ratio] key ( , ).
The light of the tray selected for the paper type
setting will blink, and the ratio display will change
as follows.
* For the difference between Heavy 1 and Heavy 2,
refer to "PAPER" (p.38).
3
After pressing the [START] key ( ),
press the [PAPER] key to exit the
settings.
To change the paper size
setting of another tray,
repeat steps 2 to 5 after
pressing the [START]
key ( ).
Envelope display
OPERATION IN COPY, PRINTER,
AND SCANNER MODES
Some operations cannot be performed simultaneously when the machine is being used in printer mode, copy mode,
or scanner mode.
Ratio display Paper type
Off Standard paper
Thin paper
Heavy paper 1*
Heavy paper 2*
to
Envelopes
For the ratio display
and envelope types,
refer to “Envelope
display”.
Labels
Transparency film
Only plain paper, recycled paper and thin
paper can be set for paper trays 1 to 4.
Note
Ratio display Envelope types
Monarch
Com-10
DL
Envelope Chou 3
YOKEI-2
Kaku-2
kaku-3
YOKEI-4
Modes Copying Printing
Scanning from a
computer
Scanning from
the machine
Copy
Copy key input Ye s Ye s Ye s N o
During copying No No No
Printer During printing Ye s Ye s Ye s
Scanner
During scan preview/
during scanning
No Yes
To Next Page
Loading...
Need help?
General
