90
SCANNER FUNCTIONS
SCANNING FROM A WIA-COMPLIANT APPLICATION
(Windows 8.1/10)
If you are using Windows 8.1/10, you can use the WIA driver to scan from Paint and other WIA-compliant
applications. The procedure for scanning using Paint is explained in the following.
1
Place the original that you wish to
scan on the document glass/RSPF.
For information on setting an original for
scanning, refer to "SCANNING USING THE
KEYS ON THE MACHINE" (p.79).
2
Start Paint and then click the "File"
menu and select "From Scanner or
Camera".
The scan screen of the WIA driver will appear.
3
Select the paper source and picture
type, and click the "Preview" button.
The preview image will
appear.
If you placed the original
on the document glass,
select "Flatbed" for the
"Paper source".
If you placed the original in
the RSPF, select
"Document Feeder" for the
"Paper source" and specify
the original size in "Page
size".
4
Click the "Scan" button.
Scanning begins and the image is acquired into
Paint.
Use "Save" in your application to specify a file
name and folder for the scanned image, and save
the image.
To cancel a scanning job after clicking the "Scan"
button, click the "Cancel" button.
WIA cannot be used on models with the network expansion kit installed.
If you have WIA drivers for other devices
installed in your computer, the "Select Device"
screen will open. Select "XX-xxxx" and click
the "OK" button.
Note
If you select "Document Feeder" for the
"Paper source" and click the "Preview" button,
the top original in the RSPF is previewed. The
previewed original is sent to the original exit
area, so you will need to return it to the RSPF
before starting the scanning job.
To Next Page
Loading...
Need help?
General
