135
10
ABOUT THE WEB PAGES
(FOR THE ADMINISTRATOR)
In addition to the menus that appear for users, other menus that can only be used by the administrator appear in the
administrator Web pages.
A menu frame appears on the left side of the page. When you click an item in the menu, a screen appears in the
right frame that allows you to configure settings for that item. Settings that can only be configured by the
administrator are explained here.
(1) Network Scanning
Set the usage method for sending data scanned
using the network scanner function.
"NETWORK SCANNING" (p.138)
(2) Information
Configure machine identification information for the
status & alert E-mail function.
"INFORMATION SETUP" (p.139)
(3) Passwords
To protect the Web site, the system administrator
can establish passwords. Enter a password that
you would like to establish and click the [Submit]
button.
One password can be established for the
administrator and one password can be
established for users.
"PROTECTING INFORMATION PROGRAMMED
IN THE WEB PAGE ([Passwords])" (p.136)
(4) Administrator Settings
Setting changes can be prohibited and interface
settings can be configured.
"ADMINISTRATOR SETTINGS" (p.137)
(5) Status Message
Configure parameters required for sending status
messages, such as destination addresses and
time schedules.
"STATUS MESSAGE SETUP" (p.140)
(6) Alerts Message
Store destination addresses for alert messages.
"ALERTS MESSAGE SETUP" (p.140)
(7) Security
Unused ports can be disabled for greater security
and port numbers can be changed.
(8) SSL Settings
Configure settings for SSL Settings. (p.139)
(9) Services
Configure information concerning the e-mail
system.
"SMTP SETUP" (p.139)
(10)Print Port
Configure settings for LPD and Raw print.
To Next Page
Loading...
Need help?
General
