133
WEB FUNCTIONS IN THE MACHINE
10
PRINTER CONDITION SETTING MENU
Click on a setting to view an explanation of the setting.
PRINTER CONDITION SETTINGS
Factory default settings are indicated in bold.
Default Settings
Condition Settings
Default Settings Factory default settings
Copies 1
Orientation Portrait
Default Paper Size A4
Default Paper
Source
Auto
2-Sided Print 1-Sided
2-sided original type
(Scan)
1-Sided
ROPM (Rip Once,
Print Many)
Enable
Condition Settings
PCL Settings Factory default settings
Symbol Set PC-8
Font 0: Courier (internal font)
Line Feed Code CR=CR; LF=LF; FF=FF
Wide A4 Disable
PostScript settings Factory default settings
Print PS Errors Disable
Item Selections Description
Copies 1 - 999 This is used to select the number of copies.
Orientation Portrait, Landscape This sets the orientation of the printed page. Select [Portrait] when
the image is longer in the vertical direction, or [Landscape] when the
image is longer in the horizontal direction.
Default Paper Size A3, B4, A4, B5, A5,
Ledger, Legal,
Foolscap,
8-1/2×13-2/5(216×3
40),
216×343(8-1/2×13-
1/2), Letter, Invoice
This sets the default paper size used for printing. Even if the set size
of paper is not in any of the trays, the printed image is formed in
accordance with this setting.
Default Paper
Source
Auto, Tray 1,
Tray 2*, Tray 3*,
Tray 4 * ,
Bypass (Manual),
Bypass (Auto)
This sets the default paper tray.
*Selections available depend on the trays that are installed.
2-Sided Print 1-Sided,
2-Sided (Book),
2-Sided (Tablet)
When [2-Sided (Book)] is selected, two-sided printing takes place so
as to allow binding at the left side. When [2-Sided (Tablet)] is
selected, two-sided printing takes place so as to allow binding at the
top. (Only for models that support two-sided printing.)
2-sided original type
(Scan)
1-Sided,
2-Sided
This sets whether or not to allow two-sided original for scan. (Only
for models that support two-sided original.)
ROPM (Rip Once,
Print Many)
Enable, Disable This enables the ROPM function. When enabled, multi-page print
jobs are stored in memory before printing, and thus the computer
does not need to repeatedly send the print data when multiple
copies are printed.
To Next Page
Loading...
Need help?
General
