21
SETUP
1
8
Select the IP address of the machine
from the "Address" menu and click
the "OK" button.
• Be sure to ask your system administrator
(network administrator) for the IP address of the
machine.
• The name (host name) or IP address of the
machine can be directly entered in "Address".
• If the port number used by the scanner function
of the machine has been changed, enter a
colon ":" following the IP address and then
enter the port number. (Normally the port
number does not need to be entered.)
9
Click the "OK" button.
This completes the configuration of the
scanner driver.
xxx.xxx.xxx.xxx XX-xxxx
To Next Page
Loading...
Need help?
General
