30
SETUP
Printing using the IPP function
The machine can print using the IPP function. When the machine is in a remote location, this function can be used in
place of the fax function to print a higher quality image than a fax. If you wish to use the IPP function, follow these
steps to select the PPD file when configuring the printer driver (step 12 on page 29).
1
Click the "IP" icon.
2
Select "Internet Printing Protocol-IPP" in
"Protocol". Enter the address of the
machine (IP address or domain name) and
the queue name.
Enter "ipp" in "Queue".
3
Select "Select a driver to use" (or "Select
Printer Software") from "Use" and click the
PPD file for your model.
4
Click the "Add" button.
The screen for the machine configuration appears.
Make sure that the settings are correct and click
the "OK" button.
This function can be used on models with the network expansion kit installed.
Note
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
(2)
(1)
(4)
(3)
To Next Page
Loading...
Need help?
General
