EasyManuals Logo

Sharp LC-40LX710H User Manual

Sharp LC-40LX710H
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
Turning on the power
Press POWER on the TV.
POWER indicator (Green): The TV is on. (After a few
seconds, an image appears with sound.)
After turning the power “ON” by pressing POWER on the
TV, you can turn the power ON/OFF by pressing POWER
on the remote control.
Preparation
POWER button
Turning off the power
POWER indicator
POWER indicator
NOTE
If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
Minor power is consumed when the unit is in standby
mode.
Turning the TV on/off
Press POWER on the remote control.
The TV enters standby mode and the image on the screen
disappears.
The POWER indicator on the TV changes from green to
red.
Press POWER on the TV.
The POWER indicator on the TV turns off.
When the TV is turned off by POWER on the TV, you
cannot turn on the power by pressing POWER on the
remote control.
Light off Power off
Lighted (Red) The TV is in standby mode.
Lighted (Green) The TV is on.
POWER button
Supplying electric power to the
antenna
When you set-up the D–TV antenna for the fi rst time,
or connect the antenna to a community antenna, you
need to proceed to set the antenna by following this
manual.
Selected item Description
On Select “On” when your antenna is set-up
and connected independently.
Typical supply voltage: 5V
Typical supply current: 50mA
Off Select “Off” when you do not need to
supply voltage to your antenna, i.e.
when your antenna is connected to a
community antenna. (The factory default
setting of this function is “Off”.)
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Antenna setup-DIGITAL”
and then press ENTER.
6
Press
a
/
b
to select “Supply voltage” and
then press ENTER.
7
Press
c
/
d
to select “On” and then press
ENTER.
8
Press D–TV to access D–TV mode.
1
Press
b
/
c
/
d
to select “View setting”.
4
Press
a
/
b
to select “Channel settings” and
then press ENTER.
5
40LX710H_en.indd 1640LX710H_en.indd 16 2010/04/15 16:11:172010/04/15 16:11:17

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-40LX710H and is the answer not in the manual?

Sharp LC-40LX710H Specifications

General IconGeneral
BrandSharp
ModelLC-40LX710H
CategoryLCD TV
LanguageEnglish

Related product manuals