33
Watching TV
Selecting a preset AV MODE
The “AV mode” function enables you to select
appropriate settings for audio and video to account for
the system environment which can vary due to factors
like room brightness, type of programme watched or
the type of image input from external equipment.
Selected item Description
AUTO The TV set will automatically set the
corresponding options from “AV mode”
menu according to the lighting conditions
of your viewing environment and the type
of the program which you are viewing.
STANDARD For a highly defi ned image in a normally
bright room
MOVIE For a movie
GAME Lowers image brightness for easier
viewing.
PC For PC. (Available only when inputting a
PC signal.)
USER Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC For a clear-cut image emphasising high
contrast for sports viewing.
DYNAMIC
(Fixed)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
NOTE
• You can select a different AV MODE item for each input
mode. (For example, select “STANDARD” for TV input and
“DYNAMIC” for VIDEO input.)
Press AV MODE.
• Present AV MODE displays.
Press AV MODE again before the mode
displayed on the screen disappears.
• The mode changes as shown below.
1
2
Using AV MODE on the remote control unit
Press MENU and the MENU screen displays.
1
Press
b/c/d
to select “Picture”.
3
Press
a
/
b
to select “AV mode”, and then
press ENTER.
4
Press
a
/
b
to select the desired item, and
then press ENTER.
5
Using “AV mode” on the menu screen
AUTO
STANDARD
MOVIE
GAME
PC
USER
DYNAMIC(Fixed)
DYNAMIC
AV MODE: STANDARD
AV MODE: AUTO
AV MODE: MOVIE
AV MODE: PC
AV MODE: DYNAMIC (Fixed)
AV MODE: DYNAMIC
AV MODE: USER [TV]
AV MODE: GAME
Press
c/d
to select “Setup”.
2
40LX710H_en.indd 3340LX710H_en.indd 33 2010/04/15 16:12:072010/04/15 16:12:07