38
Audio adjustment
You can adjust the audio of the selected AV mode.
Press
b/c/d
to select “Audio”.
3
Press MENU and the MENU screen displays.
1
Watching TV
NOTE
• For resetting all adjustment items to the factory preset
values, press
a
/
b
to select “Reset”, press ENTER, press
a
/
b
to select “Yes”, and then press ENTER.
Press
a
/
b
to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press
a
/
b
or
c
/
d
to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
5
Selected item
c
button
dbutton
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Increase audio from
the right speaker
Increase audio from
the left speaker
Press
b/c/d
to select “Option”.
Press MENU and the MENU screen displays.
1
3
Press
a
/
b
to select “Fixed” or “Variable”, and
then press ENTER.
Press
a
/
b
to select “Output volume select”,
and then press ENTER.
5
6
Output volume select
Allows you to select what controls the audio output.
NOTE
• The “Audio” menu cannot be operated when headphones
are plugged in or when “Variable” is selected.
Fixed
Variable
Selected item Description
Fixed • Sound via speakers is adjusted with
VOL
k
/
f
on the remote control unit or
the TV.
• Sound via the MONITOR OUT
terminals
is not adjustable and constantly outputs.
Variable • Sound via the MONITOR OUT
terminals
is adjusted with VOL
e
/
f
on the remote
control unit or the TV.
• Sound via speakers/headphone is muted.
Press
b/c/d
to select “Audio”.
Press MENU and the MENU screen displays.
1
3
Press
c
/
d
to select “On” or “Off”.
Press
a
/
b
to select “Bass enhancer”.
4
w Bass enhancer
This function allows you to enjoy bass-enhanced sound.
5
NOTE
• The “Audio” menu is grayed out when “Output volume
select” is set to “Variable”.
Press c/d to select “Setup”.
2
w SRS TruSurround (TS) HD
TM
You can enjoy SRS TruSurround HD
TM
sound, the
same as if you were in a movie theatre.
Selected item Description
On SRS TruSurround HD
TM
creates a high
quality surround sound experience,
when watching DVD movies and TV
programmes broadcast in surround
sound.
Off Outputs the normal sound.
Press
b/c/d
to select “Audio”.
Press MENU and the MENU screen displays.
1
3
Press
c
/
d
to select “On” or “Off”.
Press
a
/
b
to select “SRS TS HD”.
4
5
Press c/d to select “Setup”.
2
Press c/d to select “Setup”.
2
Press c/d to select “Setup”.
2
Press
a
/
b
to select “Terminal setting”, and
then press ENTER.
4
40LX710H_en.indd 3840LX710H_en.indd 38 2010/04/15 16:12:152010/04/15 16:12:15