Appendix
NOTE
• To attach the stand, perform the above steps in reverse order.
• As the TV is very heavy, be careful when moving it.
Mounting the TV on the wall
Removing the stand
For wall mounting with the optional bracket (AN-37AG2+AN-37P30 or AN-52AG4) remove the stand.
Before setting TV on the wall.
• Remove the connected cables (DVD, VCR, etc) from the terminals.
• Detach the four caps at the 4 locations on the rear of the TV.
66
1
2
1
2
3
2
1
1
Unfasten the 4 screws.
2
Remove the stand post from the stand.
1
Attach the stand post to the TV.
2
Insert and tighten the 4 screws into the 4 holes
on the rear of the TV.
• Use the screwdriver.
Lay the TV fl at.
• Spread a cushion over the base area to lay the TV on.
1
Unfasten the 4 screws on the rear of the TV.
2
Remove the stand.
Screwdriver
Soft cushion
Stand post
Stand
Screwdriver
Stand post
40LX710H_en.indd 6640LX710H_en.indd 66 2010/04/15 16:13:042010/04/15 16:13:04
To Next Page
Loading...
Need help?
General