w
Using the control panel of the TV
You can also operate the Menu using the control panel
of the TV.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
NOTE
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
About Menu operations
TV control panel buttons Remote control buttons
TV/VIDEO ENTER
CH
r a
CH
s b
VOL
kd
VOL
lc
18
CH listEPGTool
Menu
D-TV
:Exit:Enter:Select:Select Menu
TV2
HD ColorBar
TV1
SD Moving
TV3
H264 SD-Color Pat…
001
002
003
Preparation
Basic Menu operations
What is Menu?
• You need to bring up the On-Screen Display to perform
settings for the TV. The On-Screen Display for the settings
is called “Menu”.
• The Menu can be operated with the remote control unit.
Press MENU and the MENU screen displays.
Press
c
/
d
to select the desired menu.
Press
a
/
b/c/d
to select the desired menu
item.
Press ENTER to proceed if necessary.
1
2
3
Press EXIT or MENU to exit the MENU.
Press RETURN as necessary to return to the
previous MENUs.
5
Press
a
/
b
or
c
/
d
to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
4
About Guide Display
The operations differ depending on the functions and
menu items. Refer to the guide display for the key
buttons.
SetupCH listEPG
Menu
Picture
:Exit:Enter:Select:Select Menu
Backlight
AV mod e
OPC
[Off]
[STANDARD]
STANDARD
-16 +16+3
SetupCH list
Menu
Picture
:Back:Enter
Backlight
STANDARD
-16 +16+3
+30
Contrast
0+40
AV mode
Select picture and audio quality
[STANDARD]
40LX710H_en.indd 1840LX710H_en.indd 18 2010/04/15 16:11:212010/04/15 16:11:21
To Next Page
Loading...
Need help?
General